<?xml version="1.0" encoding="UTF-8" ?>
  <!DOCTYPE metadata (View Source for full doctype...)>
- <metadata>
- <idinfo>
- <citation>
- <citeinfo>
  <origin>Florida Division of Emergency Management</origin>
  <pubdate>2008</pubdate>
  <pubtime>Unknown</pubtime>
  <title Sync="TRUE">FDEM_Contour_1FT</title>
  <geoform Sync="TRUE">vector digital data</geoform>
  <ftname Sync="TRUE">FDEM_Contour_1FT</ftname>
  <onlink Sync="TRUE">\\claybccsp01\gis\Data\Distribution\FDEM_Contour_1FT.shp</onlink>
  </citeinfo>
  </citation>
- <descript>
  <abstract>Lidar generated contours for Florida Division of Emergency Management.</abstract>
  <purpose>Contours consistent with the deliverables and including a certain level of smoothing. Index, Intermediate, Depression, Supplementary and Low confidence contours are coded.</purpose>
  <supplinf>A complete description of this dataset is available in the Minimum Technical Standard ( MTS report) "Final Report OF Specific Purpose LiDAR Survey - LiDAR-Generated Breaklines and Contours" submited to Florida Division of Emergency Management.</supplinf>
  <langdata Sync="TRUE">en</langdata>
  </descript>
- <timeperd>
- <timeinfo>
- <sngdate>
  <caldate>2007</caldate>
  </sngdate>
  </timeinfo>
  <current>ground condition</current>
  </timeperd>
- <status>
  <progress>Complete</progress>
  <update>As needed</update>
  </status>
- <spdom>
- <bounding>
  <westbc Sync="TRUE">-81.905794</westbc>
  <eastbc Sync="TRUE">-81.603405</eastbc>
  <northbc Sync="TRUE">30.194749</northbc>
  <southbc Sync="TRUE">29.837636</southbc>
  </bounding>
- <lboundng>
  <leftbc Sync="TRUE">370000.000162</leftbc>
  <rightbc Sync="TRUE">464858.101128</rightbc>
  <bottombc Sync="TRUE">2002004.655475</bottombc>
  <topbc Sync="TRUE">2131262.288036</topbc>
  </lboundng>
  </spdom>
- <keywords>
- <theme>
  <themekt>None</themekt>
  <themekey>Breakline</themekey>
  <themekey>DTM</themekey>
  <themekey>DSM</themekey>
  <themekey>Contour</themekey>
  <themekey>Elevation</themekey>
  <themekey>Lidargrammetry</themekey>
  <themekey>Lidar</themekey>
  </theme>
- <place>
  <placekt>None</placekt>
  <placekey>Florida</placekey>
  <placekey>Clay-Putnam Counties</placekey>
  <placekey>United States</placekey>
  </place>
  </keywords>
  <accconst>This data may be used by the requested party for stated purposes and should not be re-distributed.</accconst>
  <useconst>This data is for planning purposes only and should not be used for legal or cadastral purposes. Regional Evacuation Studies are currently being updated and www.floridadisaster.org/gis should be consulted for revisions.</useconst>
- <ptcontac>
- <cntinfo>
- <cntorgp>
  <cntorg>Florida DEM</cntorg>
  </cntorgp>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>2555 Shumard Oak Boulevard</address>
  <city>Tallahassee</city>
  <state>FL</state>
  <postal>32399-2100</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>850-413-9907</cntvoice>
  <cntfax>850-488-1016</cntfax>
  <cntemail>gis@dca.state.fl.us</cntemail>
  </cntinfo>
  </ptcontac>
  <native Sync="TRUE">Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 9.3.1.3000</native>
  <natvform Sync="TRUE">Shapefile</natvform>
  </idinfo>
- <dataqual>
  <logic>Data covers the tile scheme provided for the county and was verified for correct topology (no intersection, overlap or dangles). Dewberry performed a full qualitative review of the contour data for smoothness and consistency of feature codes.</logic>
  <complete>A visual qualitative assessment was performed to ensure the data completness against the intensity images derived from Lidar points. No void or missing data.</complete>
- <posacc>
- <horizpa>
  <horizpar>The 3D breaklines inherit the accuracy of the Lidar stereopairs it was acquired from. Lidar source compiled to meet 1m horizontal accuracy.</horizpar>
- <qhorizpa>
  <horizpav>1 meter</horizpav>
  <horizpae>The PDS team does not perform independent horizontal accuracy testing on the LiDAR. LiDAR vendors perform calibrations on the LiDAR sensor and compare data to adjoing flight lines to ensure LiDAR meets the 1 meter horizontal accuracy standard at the 95% confidence level.</horizpae>
  </qhorizpa>
  </horizpa>
- <vertacc>
  <vertaccr>The 3D breaklines inherit the accuracy of the Lidar stereopairs it was acquired from.</vertaccr>
- <qvertpa>
  <vertaccv>0.55 feet</vertaccv>
  <vertacce>Based on the vertical accuracy testing conducted by PDS, using NSSDA and FEMA guidelines, vertical accuracy at the 95% confidence level (called Accuracyz) is computed by the formula RMSEz x 1.9600. The dataset for Clay-Putnam Counties, Florida satisfies the criteria: Countywide lidar dataset tested .55 feet vertical accuracy at 95% confidence level in open terrain, based on open terrain RMSEz (.28') x 1.9600. Countywide lidar dataset tested .87 feet vertical accuracy at 95% confidence level in all land cover categories combined, based on consolidated RMSEz (.445') x 1.9600.</vertacce>
  </qvertpa>
  </vertacc>
  </posacc>
- <lineage>
- <srcinfo>
- <srccite>
- <citeinfo>
  <origin>Terrapoint USA</origin>
  <pubdate>2007</pubdate>
  <pubtime>Unknown</pubtime>
  <title>Lidar</title>
  <geoform>vector digital data</geoform>
  <othercit>LiDAR Survey of Clay-Putnam Counties, Florida, conducted in 2007 in support of the Florida Division of Emergency Management (FDEM). This dataset partially edgematchs to the Flagler County dataset. The Flagler County dataset was flown in 2004 to the county boundaries and not to full FDEM tile boundaries. Because of the temporal and boundary differences in the two datasets there are two tiles in each county that do not vertically tie along a large waterbody. The tiles in Clay-Putnam, 037065_E and 039770_E, are at an elevation -.6 feet along the waterbody. The same waterbody in Flagler County is split into two sections. The tiles in Flagler, 037066_E and 039470_E, are at an elevation of -2.19 feet and 0 feet along the two sections of waterbody.</othercit>
  </citeinfo>
  </srccite>
  <typesrc>online</typesrc>
- <srctime>
- <timeinfo>
- <sngdate>
  <caldate>2007</caldate>
  </sngdate>
  </timeinfo>
  <srccurr>ground condition</srccurr>
  </srctime>
  <srccitea>Lidar</srccitea>
  <srccontr>LiDAR dataset was used to create intensity stereopairs for 3D breakline compilation.</srccontr>
  </srcinfo>
- <procstep>
  <procdesc>The ABGPS, IMU, and raw Optech 3100ea LiDAR scans are integrated using Optech Incorporated's DASHMap, version 1.1 software, Terrascan software and Microstation software. The resultant file is in a LAS binary file format . The LAS file version 1.1 format can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are referenced to the NAD83 horizontal datum and GRS80 vertical datum. The date and time for each flight line can be determined using the Julian date and time. The Julian date is a continuous count of days and fractions since noon Universal Time on January 1, 4713 BCE on the Julian Calendar.</procdesc>
  <srcused>Airborne Global Positioning System Data</srcused>
  <srcused>Inertial Measurement Unit</srcused>
  <srcused>LiDAR Scans</srcused>
  <procdate>2008</procdate>
  <srcprod>LiDAR Point Cloud LAS 1.1 format</srcprod>
- <proccont>
- <cntinfo>
- <cntorgp>
  <cntorg>Terrapoint USA</cntorg>
  </cntorgp>
  <cntpos>LiDAR Manager</cntpos>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>251216 Grogan's Park Drive</address>
  <city>The Woodlands</city>
  <state>Texas</state>
  <postal>77380</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>1-877-999-7687</cntvoice>
  <cntfax>1-281-296-0869</cntfax>
  <cntemail>peggy.cobb@terrapoint.com</cntemail>
  <hours>Monday to Friday, 8 - 5, CST</hours>
  </cntinfo>
  </proccont>
  </procstep>
- <procstep>
  <procdesc>The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary filters are applied as appropriate for the production of bare earth digital terrain models (dtms). Interactive editing methods are applied to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces. The LiDAR mass points were delivered in American Society for Photogrammetry and Remote Sensing LAS 1.1 format. The header file for each dataset is complete as define by the LAS 1.1 specification. In addition the following fields are included (Precision reported in brackets): Class (Integer); GPS Week Time (0.0001 seconds); Easting (0.01 meter); Northing (0.01 meter); Elevation (0.01 meter); Echo Number (Integer 1 to 4); Echo (Integer 1 to 4); Intensity (8 Bit Integer); Flightline (Integer); Scan Angle (Integer Degree). The LAS files do not include overlap. The data was classified as follows: Class 1 = Unclassified. This class includes vegetation, buildings, noise etc. Class 2 = Ground Class 7= Noise Class 9 = Water</procdesc>
  <srcused>LiDAR Point Cloud LAS 1.1 format</srcused>
  <procdate>2008</procdate>
  <srcprod>Classified LiDAR datasets</srcprod>
- <proccont>
- <cntinfo>
- <cntorgp>
  <cntorg>Terrapoint USA</cntorg>
  </cntorgp>
  <cntpos>LiDAR Manager</cntpos>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>251216 Grogan's Park Drive</address>
  <city>The Woodlands</city>
  <state>Texas</state>
  <postal>77380</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>1-877-999-7687</cntvoice>
  <cntfax>1-281-296-0869</cntfax>
  <cntemail>peggy.cobb@terrapoint.com</cntemail>
  <hours>Monday to Friday, 8 - 5, CST</hours>
  </cntinfo>
  </proccont>
  </procstep>
- <procstep>
  <procdesc>Dewberry used GeoCue software to develop LiDAR stereo models. The raster resolution was 1ft.</procdesc>
  <srcused>Projected and tiled LiDAR datasets</srcused>
  <procdate>2008</procdate>
  <srcprod>Lidar - stereopairs</srcprod>
- <proccont>
- <cntinfo>
- <cntorgp>
  <cntorg>Dewberry - Geospatial Services Group</cntorg>
  </cntorgp>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>8401 Arlington Boulevard</address>
  <city>Fairfax</city>
  <state>VA</state>
  <postal>22031</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>703.849.0100</cntvoice>
  </cntinfo>
  </proccont>
  </procstep>
- <procstep>
  <procdesc>LiDAR intensity stereopairs were viewed in 3-D stereo using Socet Set softcopy photogrammetric software, the breaklines were stereo-compiled in accordance with the Data Dictionary. The LiDARgrammetry was performed under the direct supervision of an ASPRS Certified Photogrammetrist. The breaklines conform with data format requirements outlined by the FDEM Baseline Specifications.</procdesc>
  <srcused>Lidar - stereopairs</srcused>
  <procdate>2008</procdate>
  <srcprod>3D breaklines</srcprod>
- <proccont>
- <cntinfo>
- <cntorgp>
  <cntorg>Dewberry - Geospatial Services Group</cntorg>
  </cntorgp>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>8401 Arlington Boulevard</address>
  <city>Fairfax</city>
  <state>VA</state>
  <postal>22031</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>703.849.0100</cntvoice>
  </cntinfo>
  </proccont>
  </procstep>
- <procstep>
  <procdesc>Using proprietary procedures developed by Dewberry, a hydroenforced bare earth TIN was created using ArcGIS. The nodes were contour model key points from the ground masspoints derived from the Lidar dataset, the 3D breaklines were included in this TIN.</procdesc>
  <srcused>Lidar ground masspoints</srcused>
  <srcused>3D Breaklines</srcused>
  <procdate>2008</procdate>
  <srcprod>Hydroenforced TIN</srcprod>
- <proccont>
- <cntinfo>
- <cntorgp>
  <cntorg>Dewberry - Geospatial Services Group</cntorg>
  </cntorgp>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>8401 Arlington Boulevard</address>
  <city>Fairfax</city>
  <state>VA</state>
  <postal>22031</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>703.849.0100</cntvoice>
  </cntinfo>
  </proccont>
  </procstep>
- <procstep>
  <procdesc>1ft contours were modeled from a hydroenforced bare earth TIN and then smoothed and simplified using proprietary procedures developed by Dewberry in ArGIS software.</procdesc>
  <srcused>Hydroenforced TIN</srcused>
  <procdate>2008</procdate>
  <srcprod>1ft Contours</srcprod>
- <proccont>
- <cntinfo>
- <cntorgp>
  <cntorg>Dewberry - Geospatial Services Group</cntorg>
  </cntorgp>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>8401 Arlington Boulevard</address>
  <city>Fairfax</city>
  <state>VA</state>
  <postal>22031</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>703.849.0100</cntvoice>
  </cntinfo>
  </proccont>
  </procstep>
- <procstep>
  <procdesc Sync="TRUE">Metadata imported.</procdesc>
  <srcused Sync="TRUE">P:\GIS_RS_Projects\FDEM\Add_On\Dewberry\Clay_Putnam\FinalDeliverables\Delivery1\Metadata\FGDC_FDEM_Clay_Putnam_CONTOUR_1FT.xml</srcused>
  <procdate Sync="TRUE">20100324</procdate>
  <proctime Sync="TRUE">08595100</proctime>
  </procstep>
- <procstep>
  <procdesc Sync="TRUE">Dataset copied.</procdesc>
  <srcused Sync="TRUE">Server=claybccgissql02; Service=sde:sqlserver:claybccgissql02; Database=clay; Version="CLAYBCC\DIAZO".od_edits</srcused>
  <procdate Sync="TRUE">20100330</procdate>
  <proctime Sync="TRUE">08500700</proctime>
  </procstep>
  </lineage>
  </dataqual>
- <spdoinfo>
  <direct Sync="TRUE">Vector</direct>
- <ptvctinf>
- <sdtsterm Name="FDEM_Contour_1FT">
  <sdtstype Sync="TRUE">String</sdtstype>
  <ptvctcnt Sync="TRUE">309260</ptvctcnt>
  </sdtsterm>
- <esriterm Name="FDEM_Contour_1FT">
  <efeatyp Sync="TRUE">Simple</efeatyp>
  <efeageom Sync="TRUE">Polyline</efeageom>
  <esritopo Sync="TRUE">FALSE</esritopo>
  <efeacnt Sync="TRUE">309260</efeacnt>
  <spindex Sync="TRUE">TRUE</spindex>
  <linrefer Sync="TRUE">FALSE</linrefer>
  <XYRank Sync="TRUE">1</XYRank>
  <ZRank Sync="TRUE">1</ZRank>
  <topoWeight Sync="TRUE">5.000000</topoWeight>
  <validateEvents Sync="TRUE">FALSE</validateEvents>
- <partTopoRules>
  <topoRuleID Sync="TRUE">54</topoRuleID>
  </partTopoRules>
- <partTopoRules>
  <topoRuleID Sync="TRUE">55</topoRuleID>
  </partTopoRules>
  </esriterm>
  </ptvctinf>
  </spdoinfo>
- <spref>
- <horizsys>
- <planar>
- <planci>
  <plance Sync="TRUE">coordinate pair</plance>
- <coordrep>
  <absres Sync="TRUE">0.000000</absres>
  <ordres Sync="TRUE">0.000000</ordres>
  </coordrep>
  <plandu Sync="TRUE">survey feet</plandu>
  </planci>
- <mapproj>
  <mapprojn Sync="TRUE">Transverse Mercator</mapprojn>
- <transmer>
  <sfctrmer Sync="TRUE">0.999941</sfctrmer>
  <longcm Sync="TRUE">-81.000000</longcm>
  <latprjo Sync="TRUE">24.333333</latprjo>
  <feast Sync="TRUE">656166.666667</feast>
  <fnorth Sync="TRUE">0.000000</fnorth>
  </transmer>
  </mapproj>
  </planar>
- <geodetic>
  <horizdn Sync="TRUE">D_North_American_1983_HARN</horizdn>
  <ellips Sync="TRUE">Geodetic Reference System 80</ellips>
  <semiaxis Sync="TRUE">6378137.000000</semiaxis>
  <denflat Sync="TRUE">298.257222</denflat>
  </geodetic>
- <cordsysn>
  <geogcsn Sync="TRUE">GCS_North_American_1983_HARN</geogcsn>
  <projcsn Sync="TRUE">NAD_1983_HARN_StatePlane_Florida_East_FIPS_0901_Feet</projcsn>
  </cordsysn>
  </horizsys>
- <vertdef>
- <altsys>
  <altdatum>North American Vertical Datum of 1988</altdatum>
  <altres Sync="TRUE">1.000000</altres>
  <altunits>feet</altunits>
  <altenc Sync="TRUE">Explicit elevation coordinate included with horizontal coordinates</altenc>
  </altsys>
  </vertdef>
  </spref>
- <eainfo>
- <detailed Name="FDEM_Contour_1FT">
- <enttyp>
  <enttypl Sync="TRUE">FDEM_Contour_1FT</enttypl>
  <enttypd>1ft Contours</enttypd>
  <enttypds>"Florida GIS - Baseline Specifications for Orthophotography and LiDAR v1.2"</enttypds>
  <enttypt Sync="TRUE">Feature Class</enttypt>
  <enttypc Sync="TRUE">309260</enttypc>
  </enttyp>
- <attr>
  <attrlabl Sync="TRUE">FID</attrlabl>
  <attalias Sync="TRUE">FID</attalias>
  <attrtype Sync="TRUE">OID</attrtype>
  <attwidth Sync="TRUE">4</attwidth>
  <atprecis Sync="TRUE">0</atprecis>
  <attscale Sync="TRUE">0</attscale>
  <attrdef Sync="TRUE">Internal feature number.</attrdef>
  <attrdefs Sync="TRUE">ESRI</attrdefs>
- <attrdomv>
  <udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
  </attrdomv>
  </attr>
- <attr>
  <attrlabl>OBJECTID</attrlabl>
  <attrdef>Internal feature number.</attrdef>
  <attrdefs>ESRI</attrdefs>
- <attrdomv>
  <udom>Sequential unique whole numbers that are automatically generated.</udom>
  </attrdomv>
  <attalias Sync="TRUE">OBJECTID</attalias>
  <attrtype Sync="TRUE">Number</attrtype>
  <attwidth Sync="TRUE">10</attwidth>
  </attr>
- <attr>
  <attrlabl>SHAPE</attrlabl>
  <attrdef>Feature geometry.</attrdef>
  <attrdefs>ESRI</attrdefs>
- <attrdomv>
  <udom>Coordinates defining the features.</udom>
  </attrdomv>
  <attalias Sync="TRUE">Shape</attalias>
  <attrtype Sync="TRUE">Geometry</attrtype>
  <attwidth Sync="TRUE">0</attwidth>
  <atprecis Sync="TRUE">0</atprecis>
  <attscale Sync="TRUE">0</attscale>
  </attr>
- <attr>
  <attrlabl Sync="TRUE">CONTOUR_EL</attrlabl>
  <attalias Sync="TRUE">CONTOUR_EL</attalias>
  <attrtype Sync="TRUE">Number</attrtype>
  <attwidth Sync="TRUE">19</attwidth>
  <atnumdec Sync="TRUE">8</atnumdec>
  </attr>
- <attr>
  <attrlabl Sync="TRUE">CONTOUR_TY</attrlabl>
  <attalias Sync="TRUE">CONTOUR_TY</attalias>
  <attrtype Sync="TRUE">String</attrtype>
  <attwidth Sync="TRUE">50</attwidth>
  </attr>
- <attr>
  <attrlabl Sync="TRUE">DATESTAMP_</attrlabl>
  <attalias Sync="TRUE">DATESTAMP_</attalias>
  <attrtype Sync="TRUE">Date</attrtype>
  <attwidth Sync="TRUE">8</attwidth>
  </attr>
- <attr>
  <attrlabl Sync="TRUE">Shape_len</attrlabl>
  <attalias Sync="TRUE">Shape_len</attalias>
  <attrtype Sync="TRUE">Float</attrtype>
  <attwidth Sync="TRUE">19</attwidth>
  <atnumdec Sync="TRUE">11</atnumdec>
  </attr>
  </detailed>
  </eainfo>
- <distinfo>
- <distrib>
- <cntinfo>
- <cntorgp>
  <cntorg>Florida Division of Emergency Management</cntorg>
  </cntorgp>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>2555 Shumard Oak Blvd</address>
  <city>Tallahassee</city>
  <state>FL</state>
  <postal>32399</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>850-413-9907</cntvoice>
  <cntfax>850-488-1016</cntfax>
  <cntemail>EOC-GIS@em.myflorida.com</cntemail>
  </cntinfo>
  </distrib>
  <resdesc>Downloadable Data</resdesc>
  <distliab>The data represent the results of data collection and processing for a specific Florida Division of Emergency Management activity and indicates the general existing conditions at the time of the data collection. As such, it is only valid for its intended use, content, time, and accuracy specifications. The user is responsible for the results of any application of the data for other than its intended purpose.</distliab>
- <stdorder>
- <digform>
- <digtinfo>
  <transize Sync="TRUE">610.526</transize>
  <dssize Sync="TRUE">610.526</dssize>
  </digtinfo>
  </digform>
  </stdorder>
  </distinfo>
- <metainfo>
  <metd Sync="TRUE">20100330</metd>
- <metc>
- <cntinfo>
- <cntperp>
  <cntper>Richard Butgereit</cntper>
  <cntorg>Florida DEM</cntorg>
  </cntperp>
  <cntpos>GIS Administrator</cntpos>
- <cntaddr>
  <addrtype>mailing and physical address</addrtype>
  <address>2555 Shumard Oak Boulevard</address>
  <city>Tallahassee</city>
  <state>FL</state>
  <postal>32399-2100</postal>
  <country>USA</country>
  </cntaddr>
  <cntvoice>850-413-9907</cntvoice>
  <cntfax>850-488-1016</cntfax>
  <cntemail>richard.butgereit@em.myflorida.com</cntemail>
- <cntorgp>
  <cntper>REQUIRED: The person responsible for the metadata information.</cntper>
  <cntorg>REQUIRED: The organization responsible for the metadata information.</cntorg>
  </cntorgp>
  </cntinfo>
  </metc>
  <metstdn Sync="TRUE">FGDC Content Standards for Digital Geospatial Metadata</metstdn>
  <metstdv Sync="TRUE">FGDC-STD-001-1998</metstdv>
  <mettc Sync="TRUE">local time</mettc>
- <metextns>
  <onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
  <metprof>ESRI Metadata Profile</metprof>
  </metextns>
- <metextns>
  <onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
  <metprof>ESRI Metadata Profile</metprof>
  </metextns>
- <metextns>
  <onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
  <metprof>ESRI Metadata Profile</metprof>
  </metextns>
- <metextns>
  <onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
  <metprof>ESRI Metadata Profile</metprof>
  </metextns>
- <metextns>
  <onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
  <metprof>ESRI Metadata Profile</metprof>
  </metextns>
  <langmeta Sync="TRUE">en</langmeta>
- <metextns>
  <onlink Sync="TRUE">http://www.esri.com/metadata/esriprof80.html</onlink>
  <metprof Sync="TRUE">ESRI Metadata Profile</metprof>
  </metextns>
  </metainfo>
- <Esri>
  <CreaDate>20100330</CreaDate>
  <CreaTime>08500700</CreaTime>
  <SyncOnce>FALSE</SyncOnce>
  <SyncDate>20100330</SyncDate>
  <SyncTime>08533800</SyncTime>
  <ModDate>20100330</ModDate>
  <ModTime>08533800</ModTime>
- <DataProperties>
- <lineage>
  <Process ToolSource="C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Analysis Tools.tbx\Clip" Date="20100326" Time="082950">Clip CONTOUR_1FT clay.DBO.County G:\Data\Clay-Putnam\GDB\Final_Clay_Putnam_Complete.gdb\TOPOGRAPHIC\CONTOUR_1FT_Clip1 "0.002 Feet"</Process>
  <Process ToolSource="C:\Program Files\ArcGIS\ArcToolbox\Toolboxes\Conversion Tools.tbx\FeatureClassToFeatureClass" Date="20100330" Time="075146">FeatureClassToFeatureClass G:\Data\Clay-Putnam\GDB\Final_Clay_Putnam_Complete.gdb\TOPOGRAPHIC\CONTOUR_1FT_Clip1 "Database Connections\XXclaybccgissql02_Owner.sde\clay.DBO.Environment" Contour_FDEM_1FT # "CONTOUR_ELEVATION_MS 'CONTOUR_ELEVATION_MS' true true false 8 Double 0 0 ,First,#,G:\Data\Clay-Putnam\GDB\Final_Clay_Putnam_Complete.gdb\TOPOGRAPHIC\CONTOUR_1FT_Clip1,CONTOUR_ELEVATION_MS,-1,-1;CONTOUR_TYPE_DESC 'CONTOUR_TYPE_DESC' true true false 50 Text 0 0 ,First,#,G:\Data\Clay-Putnam\GDB\Final_Clay_Putnam_Complete.gdb\TOPOGRAPHIC\CONTOUR_1FT_Clip1,CONTOUR_TYPE_DESC,-1,-1;DATESTAMP_DT 'DATESTAMP_DT' true true false 8 Date 0 0 ,First,#,G:\Data\Clay-Putnam\GDB\Final_Clay_Putnam_Complete.gdb\TOPOGRAPHIC\CONTOUR_1FT_Clip1,DATESTAMP_DT,-1,-1;Shape_Length 'Shape_Length' false true true 8 Double 0 0 ,First,#,G:\Data\Clay-Putnam\GDB\Final_Clay_Putnam_Complete.gdb\TOPOGRAPHIC\CONTOUR_1FT_Clip1,Shape_Length,-1,-1" # "Database Connections\XXclaybccgissql02_Owner.sde\clay.DBO.Environment\clay.DBO.Contour_FDEM_1FT"</Process>
  </lineage>
  </DataProperties>
  <MetaID>{1D5FFB45-407E-4D82-A985-B8EB36515975}</MetaID>
  </Esri>
- <dataIdInfo>
  <envirDesc Sync="TRUE">Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 9.3.1.3000</envirDesc>
- <dataLang>
  <languageCode Sync="TRUE" value="en" />
  </dataLang>
- <idCitation>
  <resTitle Sync="TRUE">FDEM_Contour_1FT</resTitle>
- <presForm>
  <PresFormCd Sync="TRUE" value="005" />
  </presForm>
  </idCitation>
- <dataExt>
- <geoEle>
- <GeoBndBox esriExtentType="native">
  <westBL Sync="TRUE">370000.000162</westBL>
  <eastBL Sync="TRUE">464858.101128</eastBL>
  <northBL Sync="TRUE">2131262.288036</northBL>
  <southBL Sync="TRUE">2002004.655475</southBL>
  <exTypeCode Sync="TRUE">1</exTypeCode>
  </GeoBndBox>
  </geoEle>
  </dataExt>
- <geoBox esriExtentType="decdegrees">
  <westBL Sync="TRUE">-81.905794</westBL>
  <eastBL Sync="TRUE">-81.603405</eastBL>
  <northBL Sync="TRUE">30.194749</northBL>
  <southBL Sync="TRUE">29.837636</southBL>
  <exTypeCode Sync="TRUE">1</exTypeCode>
  </geoBox>
- <spatRpType>
  <SpatRepTypCd Sync="TRUE" value="001" />
  </spatRpType>
  </dataIdInfo>
- <mdLang>
  <languageCode Sync="TRUE" value="en" />
  </mdLang>
  <mdStanName Sync="TRUE">ISO 19115 Geographic Information - Metadata</mdStanName>
  <mdStanVer Sync="TRUE">DIS_ESRI1.0</mdStanVer>
- <mdChar>
  <CharSetCd Sync="TRUE" value="004" />
  </mdChar>
- <mdHrLv>
  <ScopeCd Sync="TRUE" value="005" />
  </mdHrLv>
  <mdHrLvName Sync="TRUE">dataset</mdHrLvName>
- <distInfo>
- <distributor>
- <distorTran>
- <onLineSrc>
  <orDesc Sync="TRUE">002</orDesc>
  <linkage Sync="TRUE">file://\\claybccsp01\gis\Data\Distribution\FDEM_Contour_1FT.shp</linkage>
  <protocol Sync="TRUE">Local Area Network</protocol>
  </onLineSrc>
  <transSize Sync="TRUE">610.526</transSize>
  </distorTran>
- <distorFormat>
  <formatName Sync="TRUE">Shapefile</formatName>
  </distorFormat>
  </distributor>
  </distInfo>
- <refSysInfo>
- <RefSystem>
- <refSysID>
  <identCode Sync="TRUE">NAD_1983_HARN_StatePlane_Florida_East_FIPS_0901_Feet</identCode>
  </refSysID>
  </RefSystem>
  </refSysInfo>
- <spatRepInfo>
- <VectSpatRep>
- <topLvl>
  <TopoLevCd Sync="TRUE" value="001" />
  </topLvl>
- <geometObjs Name="FDEM_Contour_1FT">
- <geoObjTyp>
  <GeoObjTypCd Sync="TRUE" value="001" />
  </geoObjTyp>
  <geoObjCnt Sync="TRUE">309260</geoObjCnt>
  </geometObjs>
  </VectSpatRep>
  </spatRepInfo>
  <mdDateSt Sync="TRUE">20100330</mdDateSt>
  </metadata>